Sharp FO-2081 Operation Manual page 44

10
You will return to the window of step 8. If you wish to install
Button Manager, click the "Button Manager" button.
If you do not wish to install Button Manager, click the "Close" button and go
to step 12.
After the installation, a message prompting you to restart your computer
may appear. In this case, click the "Yes" button to restart your computer.
11
If you wish to install the PC-Fax driver, click the "PC-Fax
Driver" button in step 8.
In the port selection screen that appears when the PC-Fax driver is being
installed, select the same port as the MFP driver that is already installed.
12
When installing is finished, click the "Close" button.
• If you are using Windows Vista or 7 and a security warning window
appears, be sure to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a warning message
appears regarding the Windows logo test or digital signature, be sure
to click "Continue Anyway" or "Yes".
A message will appear instructing you to connect the machine to your
computer. Click the "OK" button.
After the installation, a message prompting you to restart your computer
may appear. In this case, click the "Yes" button to restart your computer.
13
Make sure that the power of the machine is turned on, and then
connect the USB cable (p.44).
Windows will detect the machine and a Plug and Play screen will appear.
14
Follow the instructions in the plug and play window to install
the driver.
Follow the on-screen instructions.
• If you are using Windows Vista or 7 and a security warning window
appears, be sure to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a warning message
appears regarding the Windows logo test or digital signature, be sure
to click "Continue Anyway" or "Yes".
This completes the installation of the software.
If you installed Button Manager, set up Button Manager as explained in "SETTING
UP BUTTON MANAGER" (p.55).
INSTALLING THE SOFTWARE
43