Basic Procedure For Making Copies; Making Copies; Using The Automatic Document Feeder To Make Copies - Sharp MX-5500N User Manual

BASIC PROCEDURE FOR
2

MAKING COPIES

This chapter explains the basic procedures for making copies, including selection of the copy ratio and other copy
settings.
MAKING COPIES
USING THE AUTOMATIC DOCUMENT FEEDER TO
MAKE COPIES
This section explains how to make copies (1-sided copies of 1-sided originals) using the automatic document feeder.
Indicator
line
1
Color Mode
Full Color
Exposure
Auto
2
Copy Ratio
100%
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.
Special Modes
Plain
8½x11
1. 2.
8½x11 8½x11
3. 11x17
4. 8½x14
Original Paper Select
Auto
Auto
8½x11
8½x11
Plain
Place the originals face up in the
document feeder tray with the edges
aligned evenly.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
Check the paper to be used and the
color mode.
2-Sided Copy
Make sure that the desired paper (tray) and color mode are
Output
selected.
File • To change the paper (tray), touch the [Paper Select] key.
☞
PAPER TRAYS
Quick File
• To change the color mode, touch the [Color Mode] key.
☞
COPY COLOR MODES
15
(page 14)
(page 24)