Adjusting Red/Green/Blue In Copies (Rgb Adjust) - Sharp MX-5500N User Manual

ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust)

This feature is used to strengthen or weaken any one of the three color components R (red), G (green), or B (blue).
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the
2
(3) Touch the [Color Adjustments] key.
(4) Touch the [RGB Adjust] key.
☞
[Color Adjustments] KEY
(2)
Color Adjustments
RGB Adjust
Only one color can be adjusted.
R(Red)
3
4
To cancel scanning and copying...
Press the [STOP] key (
To cancel an RGB adjust setting...
Touch the [Cancel] key in the screen of step 3.
keys to switch through the screens.
(page 117)
(1)
Cancel
B(Blue)
G(Green)
-2 -1 0 1 2
).
R(Red)+
G(Green)+
B(Blue)+
Adjust red, green, or blue.
(3)
(1) Touch the key of the color that you wish to
OK
adjust: [R (Red)], [G (Green)], or [B (Blue)].
OK
Only one color can be adjusted. (If you adjust one color
and then adjust another color, the adjustment of the first
color is canceled.)
(2) Adjust the selected color.
Touch the [+] key to strengthen the selected color, or
touch the [-] key to weaken the color.
(3) Touch the [OK] key.
You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.
Press the [COLOR START] key (
Copying will begin.
If you are using the document glass to copy multiple original
pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the
[COLOR START] key (
been scanned and then touch the [Read-End] key.
118
). Repeat until all pages have
).