Printing A Stored File - Sharp MX-5500N User Manual

PRINTING A STORED FILE

A file stored using document filing can be retrieved and printed when needed. The settings used when the file was
stored are also stored, and thus the file can be printed again using those settings. The file can also be modified before
printing by changing the print settings.
After selecting the desired file, follow the steps below.
☞
SELECTING A FILE
Job Settings
file-01
Select the job.
1
Print
Move
Job Settings / Print
file-01
Paper Select
Auto
2
Output
2-Sided
Special Modes
• A file saved in black and white or grayscale cannot be printed in color.
• When a long size document is stored from Scan to HDD or scan mode, the file cannot be printed. A file stored from scan
mode that included fax mode or Internet fax mode destinations in a broadcast transmission can be printed.
• If print settings are changed when a stored file is printed, the only changed setting that can be stored is the number of
copies.
• The printing speed may be somewhat slow depending on the resolution and exposure mode settings of the stored file.
(page 29)
Name 1 8½x11 F. Color
Property
Send
Change
Delete Detail
Name 1 8½x11 F. Color
Number of Prints
1
Print and Delete the Data
(1 999)
Print and Save the Data
B/W Print
Touch the [Print] key.
Cancel
Touch the [Print and Delete the Data] key
Cancel
or the [Print and Save the Data] key.
If the [Print and Delete the Data] key is touched, the files will be
automatically deleted after printing.
If the [Print and Save the Data] key is touched, the files will be
saved after printing.
Output settings, 2-sided printing, special modes, the number of
copies, and other settings can be selected. For more
information, see
31
"PRINT SETTINGS SCREEN" (page 32).