Sharp MX-5500N User Manual page 232

(1)
Scan/Special Modes
Erase
3
Edge Center
Erase Erase
(3)
To
5 10 15
Condition
Settings
AAA AAA
Address Review
CCC CCC
Address Entry
EEE EEE
Global
GGG GGG
Address Search
III III
4
Frequent Use
Sort Address
• When scanning to USB memory, there is no need to specify the destination. Go to step 5.
• In addition to specification by a one-touch key, a destination can also be specified by a search number. You can
also manually enter an e-mail address or look up an e-mail address in a global address book. For more information,
see "2. ENTERING
5
If the destination is an Internet fax destination, press the [BLACK & WHITE START] key (
To cancel scanning...
Press the [STOP] key (
(2)
Cancel
Edge+Center
Edge
Erase
1/2
(0 1)
inch
(2)
Cc
BBB BBB
DDD DDD
FFF FFF
HHH HHH
JJJ JJJ
ABCD EFGHI JKLMN OPQRST
DESTINATIONS" (page 20).
or
) to cancel the operation.
Select the erase settings.
(3)
(1) Touch the desired erase mode.
OK
Select one of the three erase modes.
OK
(2) Set the erasure width with the
0" to 1" (0 mm to 20 mm) can be entered.
(3) Touch the [OK] key.
Specify the destination.
(1) Touch the [Address Book] key in the base
screen.
1
2
(2) Touch one-touch keys of the destinations
that you wish to store in the group.
(3) Touch the [To] key.
UVWXYZ
Press the [COLOR START] key (
or the [BLACK & WHITE START] key
( ).
Scanning begins.
• If you inserted the original pages in the document feeder
tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan
each page one page at a time.
When scanning of one page finishes, replace it with the next
page and press the [COLOR START] key (
[BLACK & WHITE START] key (
have been scanned and then press the [Read-End] key.
A beep will sound to indicate that scanning is finished.
75
keys.
)
) or the
). Repeat until all pages
).