Table of Contents
Advertisement
5. If you will be installing a SAS hard disk drive into the SAS ID 1 location, you will
6. Install the blade server cover (see "Installing the blade server cover" on page
7. Install the blade server into the BladeCenter unit (see "Installing the blade
8. If you are instructed to return the expansion card, follow all packaging
68
BladeCenter HS20 Type 7981: Problem Determination and Service Guide
need to remove the expansion card tray. Remove the screws that secure the
expansion card tray to the system board; then, lift the tray from the system
board.
60).
server in a BladeCenter unit" on page 58).
instructions, and use any packaging materials for shipping that are supplied to
you.
Advertisement
Table of Contents
