(2) Set the stylus pen in the place shown in the illus-
tration.
(3) Attach the supplied connector cover to the
machine. (One supplied screw A)
(4) Attach the supplied duct cover.
(Two supplied screws B)
Installation Manual
Tab
E-8
11. Connecting the power cord
Note:
Steps (1) and (2) may be unnecessary depending
on the applicable marketing area.
(1) Connect the power cord.
Use the appropriate power cord.
Failure to do this could result in a fire or
electrical shock.
(2) Fit the supplied cord clamp A over the power
cord. (One supplied screw C)
(3) Plug the power cord into the power outlet.
Y118120-9