Configuration Procedures - Olivetti d-Color MF554 Installation Manual

(17) Remove the stopper from the hinge of the
reverse automatic document feeder.
(One screw each for right and left)
Change the set position of the stopper to the
upper side and secure it in position.

3. Configuration procedures

(1) Plug the power cord into the power outlet and
turn ON the power switch.
(2) Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
(3) Touch "System 2."
(4) Touch "Stamp."
(5) Touch "Set."
(6) Touch "END."
(7) Touch "Exit" on the Service Mode screen.
(8) Turn OFF and ON the power switch.
Note:
When displayed the Service Mode screen, be sure
to turn off the power after exiting the Service Mode
screen and wait for 10 seconds or more before
turning on.
Installation Manual
E-18 Y118120-9