VTech CS5319-15 User Manual page 33

I cannot dial Make sure there is a dial
out. tone before dialing. It is
normal if the handset
takes a second or two
to synchronize with the
telephone base before
producing a dial tone.
Wait an extra second
before dialing.
Eliminate any
background noise.
Mute the handset
before dialing, or dial
from another room in
your home with less
background noise.
The display The handset is
deregistered from the
shows To
telephone base.
register HS...
1. Unplug the telephone
and ...see
manual
alternately. The
handset does
not work at all.
2. Place the handset in
The handset shows
Registered and you
hear a beep when the
registration process
completes. This process
takes about 90 seconds
to complete.
The display Place the handset in
shows Low
the telephone base or
battery.
charger for charging.
The battery Make sure the handset is
does not placed in the telephone
charge in the base or charger correctly.
handset or the
handset battery
If the battery is
does not
completely depleted,
accept charge.
charge the battery for at
least 30 minutes before
use.
You may need to
purchase a new battery.
The telephone Make sure the ringer
does not ring volume is not set to off.
when there is
The handset may be too
an incoming
far from the telephone
call.
base. Move it closer to
the telephone base.
base power adapter
from the power outlet,
and then plug it back
in.
the telephone base to
register it back.
My handset
beeps and is
not performing
normally.
I hear other
calls when
using the
telephone.
I hear noise on
the cordless
handset and
the keys do not
work.
27
Move the handset closer
to the telephone base. It
may be out of range.
Disconnect the telephone
base from the telephone
wall jack. Plug in a different
telephone. If you still hear
other calls, the problem is
probably in the wiring or
telephone service. Contact
your telephone service
provider.
Make sure the telephone
line cord is plugged in
securely.