Frequently Asked Questions - VTech CS5319-15 User Manual

Registering...
Ringer muted
Speaker
To register
HS...
...see manual
Unable to
call
XX missed
calls
** Paging **
The handset
registration is in
progress.
The handset ringer
is muted temporarily
during an incoming
call.
The handset
speakerphone is in
use.
Screen display on
a non-registered
handset.
The handset is out of
range while on a call.
Failed phone call (the
telephone line is in
use).
Failed intercom call
(there are already two
handsets being used).
There are new calls in
the caller ID log.
All system handsets
are being paged.
Frequently asked
questions
Below are the questions most frequently
asked about the cordless telephone.
If you cannot find the answer to your
question, visit our website at
www.vtechphones.com or call
1 (800) 595-9511 for customer service.
In Canada, visit
phones.vtechcanada.com or call
1 (800) 267-7377.
My telephone
does not work
at all.
The display
shows No line.
I cannot hear
the dial tone.
26
Make sure the telephone
base is installed properly,
and battery is installed
and charged correctly.
For optimum daily
performance, return the
handset to the telephone
base after use.
Disconnect the
telephone line cord from
your telephone and
connect it to another
telephone. If there is
no dial tone on that
other telephone either,
then the telephone line
cord may be defective.
Try installing a new
telephone line cord.
If changing telephone
line cord does not
help, the wall jack (or
the wiring to this wall
jack) may be defective.
Contact your telephone
service provider.
You may be using a new
cable or VoIP service,
the existing telephone
jacks in your home may
no longer work. Contact
your service provider for
solutions.