–
Put throttle grip
S03611-11
–
Plug in wake-up connector
the diagnostics connector
The combination instrument lighting is activated.
Info
The connector is included as part of the motorcy-
cle's separate enclosure.
–
Wait for at least five seconds.
–
Release the fixing means from the throttle grip.
The oil pump is timed.
Info
The oil pump is actuated at various speeds.
The procedure is clearly audible.
–
Wait until you can no longer hear the oil pump operating.
–
Disconnect the wake-up connector from the diagnostics
connector.
S03512-10
–
Check whether air bubbles are visible in the hose
»
If air bubbles are visible:
–
Repeat the entire procedure until air bubbles are
no longer visible.
–
Mount protection cap on the diagnostics connector.
–
Mount the EFI control unit on the rubber lugs.
S03513-10
Finishing work
–
Mount the seat. (
SERVICE WORK ON THE ENGINE 18
3
into full throttle position and secure.
4
for priming the oil pump to
5
.
p. 73)
6
.
139