Installing The Lower Triple Clamp - KTM 150 XC-W 2023 Owner's Manual

12.10

Installing the lower triple clamp

Main work
–
Remove screws
holder to the side.
S03514-10
–
Remove screw
–
Loosen screw
handlebar and hang them to the side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
E00921-10
–
Remove O-ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
E00922-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
Mount protective ring
V00359-10
SERVICE WORK ON THE CHASSIS 12
1
and hang the combination instrument
2
.
3
. Take off the upper triple clamp with the
4
. Remove protective ring
p. 165)
1
2 3
and O-ring .
5
.
is correctly posi-
67