Regency City CV50E DIRECT VENT Owners & Installation Manual page 24

owner's information
5. Carefully move bottom of glass panel into the support channel as shown
below. The glass will lean outwards.
Glass panel--leaning on support
NOTE: The firebox glass may remain propped up in the support channel to
clean the interior surface.
NOTE: The firebox glass may remain propped on the glass supports to clean
the interior surface. Use care when cleaning -- do not apply excessive force
or pressure.
6. To remove the firebox glass panel from the unit: tilt the glass forward
gently, grip both suction clamps and lift the glass up and out of the unit.
7. To install glass--reverse steps.
IMPORTANT: Remove glass panel completely when installing or removing
panels, logs, media, etc. to avoid causing any damage to the glass.
24
| City Series CV50E