Supermicro X11QPL User Manual page 130

Super X11QPL User's Manual
IPMI LAN Selection (Available when Update IPMI LAN Configuration is set to Yes)
Use this feature to select the type of the IPMI LAN. The options are Dedicated, Shared,
and Failover.
VLAN
Select Enabled to enable IPMI VLAN function support. The default setting is Disabled.
Configuration Address Source
Use this feature to select the IP address source for this computer. If Static is selected, you
will need to know the IP address of this computer and enter it to the system manually in the
field. If DHCP is selected, AMI BIOS will search for a DHCP (Dynamic Host Configuration
Protocol) server attached to the network and request the next available IP address for this
computer. The options are DHCP and Static.
IPv6 Support: Select Enabled for IPv6 support. The options are Enabled, and Disabled. If
this option is set to Enabled, the following item will display:
Configuration Address Source: Use this feature to select the IP address source
for this computer. If Static is selected, you will need to know the IP address of this
computer and enter it to the system manually in the field. If DHCP is selected, AMI
BIOS will search for a DHCP (Dynamic Host Configuration Protocol) server attached to
the network and request the next available IP address for this computer. The options are
DHCP and Static
130