Supermicro X11QPL User Manual page 102

Table of Contents

Advertisement

Super X11QPL User's Manual
MMIO High Granularity Size
Use this feature to select the high memory size according to memory-address mapping for
the IO hub. The options are 1G, 4G, 16G, 64G, 256G, and 1024G.
Maximum Read Request
Select Auto for the system BIOS to automatically set the maximum size for a read request
for a PCI-E device to enhance system performance. The options are Auto, 128 Bytes, 256
Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
MMCFG Base
This feature determines how the lowest MMCFG (Memory-Mapped Configuration) base is
assigned to onboard PCI devices. The options are 1G, 1.5G, 1.75G. 2G, 2.25G, and 3G.
VGA Priority
Use this feature to select the graphics device to be used as the primary video display for
system boot. The options are Auto, Onboard and Offboard.
Onboard Video OPROM (Option ROM)
Use this feature to select the Onboard Video Option ROM type. The options are Do not
launch, Legacy and UEFI.
Onboard NVMe Option ROM Type
Use this feature to select the Onboard NVMe Option ROM Type. The options are Disabled,
Legacy, and EFI.
SLOT1 PCI-E 3.0x8 (in x16) Option ROM/SLOT2 PCI-E 3.0 x8 Option ROM/SLOT3
PCI-E 3.0x8 Option ROM/SLOT4 PCI-E 3.0x8 Option ROM/SLOT5 PCI-E 3.0x8 Option
ROM/SLOT6 PCI-E 3.0x8 Option ROM/SLOT7 PCI-E 3.0x16 Option ROM
Select EFI to allow the user to boot the computer using an EFI (Extensible Firmware Interface)
device installed on the PCI-E slot specified by the user. Select Legacy to allow the user to
boot the computer using a legacy device installed on the PCI-E slot specified by the user. The
options are Disabled, Legacy, and EFI. (Note: Riser card names may differ in each system.)
Onboard LAN1 OPROM (Option ROM)
Use this feature to select the Onboard LAN1 OPROM option. The options are Disabled,
Legacy, and EFI.
Network Stack Configuration
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are Enabled and Disabled.
102

Advertisement

Table of Contents
loading

Table of Contents