Changing The Program Sequence; Changing A Program Once It Has Started; Adding Laundry - Miele PDR 514 Operating And Installation Instructions

Changing the program sequence

Selecting another
program
22

Changing a program once it has started

You cannot change to another program once a program has started
(this prevents unintentional alterations). You will need to cancel the
current program before you can select a new one.
 Risk of fire due to incorrect use and operation.
The laundry can burn and destroy the tumble dryer and the sur-
roundings.
Read and observe the "IMPORTANT SAFETY INSTRUCTIONS".
If you adjust the program selector, the  symbol will light up in the
time display. The  symbol goes out when you select the original
program.
Canceling the current program
Touch the Start/Stop sensor button for more than 2 seconds.

The items will be cooled down, depending on the temperature
reached and how long they have been dried for.
 will light up if you press the Start/Stop sensor button again dur-
ing the cooling-down phase.
Open the door.

Close the door.

Turn the program selector to another program.

Touch the Start/Stop sensor button.


Adding laundry

Open the door.

 Risk of burns by touching hot laundry or the drum.
The laundry and the tumble dryer drum are still hot and can cause
burns if they are touched.
Let the laundry cool down and remove it carefully.
Add items.

Close the door.

Start the program.

Adding laundry during ongoing Delay Start period
You can open the door to add or remove laundry.
- All program settings will be saved.
- You can still change the drying level, if required.
Open the door.

Remove or add the laundry.

Close the door.
