Starting A Program - Miele TXI 680 WP Operating Instructions Manual

5. Starting a program

Starting a program
 Touch the flashing Start/Add laundry
sensor button.
The Start/Add laundry sensor button
will light up and Drying appears in the
display.
Notes
If a delay start time has been selected,
then this will count down on the time
display. At the end of the delay start
time or immediately after the program
has started (if no delay start time has
been selected), the program duration
will appear on the time display.
With a longer delay start time, the drum
will rotate occasionally to untangle the
laundry. This is not a fault.
- The Perfect Dry indicator will only
flash/light up with programs with se-
lectable drying levels (see also "Op-
erating the tumble dryer").
32
- This dryer measures residual mois-
ture content in the laundry to ensure
perfect drying results.
However, if you load the dryer with
little or dry laundry, it will be dried/
aired for a set duration. In this case,
Perfect Dry does not light up at the
end of the program.

Avoid overdrying items of laun-
dry and garments.
Otherwise they can wear out!