Advertisement
Installation Procedure
Example)
• If you have selected desired option, you can shortly press the K2 switch to adjust the value of the Seg 3, Seg 4 and
change the function for the selected option.
Example)
• After selecting the function for options, press and hold the K2 switch for 2 seconds. Edited value of the option will be
saved when entire segments blinks and tracking mode begins.
Option item
Setting to Cool or Heat only
mode
Unused option
Mixed mode indoor input
Auto Change Over
Channel address
CAUTION
• Edited option will not be saved if you do not end the option setting as explained in above instruction.
※ While you are setting the option, you may press and hold the K1 button to reset the value to previous setting.
※ If you want to restore the setting to factory default, press and hold the K4 button while you are in the option setting mode.
‐ If you press and hold the K4 button, setting will be restored to factory default but it doesn't mean that restored
setting is saved. Press and hold the K2 button. When the segments shows that tracking mode is in progress,
setting will be saved.
24
English
DB68-12535A-00_IM_23Y FJM Outdoor_AA_EN_.indd 24
DB68-12535A-00_IM_23Y FJM Outdoor_AA_EN_.indd 24
Input unit
SEG1
SEG2
Main
0
0
Main
0
1
Main
0
2
Main
0
3
Main
0
4
SEG3
SEG4
0
0
Cooling and Heating (Factory default)
0
1
0
2
0
0
0
1
0
0
Disabled (Factory default)
0
1
0
0
0
1
Enabled (Factory default)
A
U
Automatic setting (Factory default)
00 ~ 15
Function
Only Cooling
Only Heating
Unused option
Unused option
Enabled
Disabled
Manual setting
2023-09-22 오후 1:46:58
2023-09-22 오후 1:46:58
Advertisement
