Advertisement
• K4 View mode Display changes
Display
Push
Explanation
Present
1
Compressor
Frequency
Target Compressor
2
Frequency
3
EEV0 current step
4
EEV1 current step
5
EEV2 current step
6
EEV3 current step
7
EEV4 current step
Fan RPM (H: high,
8
L: low, Blank: off )
PCB MAIN - OUT
DB68-12535A-00_IM_23Y FJM Outdoor_AA_EN_.indd 23
DB68-12535A-00_IM_23Y FJM Outdoor_AA_EN_.indd 23
Push
Display Explanation
9
Discharge temperature
10
OLP temperature
11
Condenser temperature
12
Outdoor temperature
13
Running current
Target Discharge
14
temperature
Total capacity of the
15
indoor units
Safety Control
16
(just For Service
Technician)
DISPLAY 1
DISPLAY 2
K1 K2 K3 K4
Setting the outdoor option
• Press and hold K2 to enter the option setting.
(Only available when the operation is stopped)
‐ If you enter the option setting, display will show the
following.
‐ Seg 1 and Seg 2 will display the number for selected
option.
‐ Seg 3 and Seg 4 will display the number for set
value of the selected option.
• If you have selected desired option, you can shortly
press the K1 switch to adjust the value of the Seg 1,
Seg 2 and change the function for the selected option.
23
English
2023-09-22 오후 1:46:58
2023-09-22 오후 1:46:58
Advertisement
