Pro-Form PFEL89720-INT.0 User Manual page 25

HOW TO CHANGE CONSOLE SETTINGS
1. Select the settings mode.
If you are using the manual mode or an iFit work-
out, you must stop pedaling and exit the workout
before you can select the settings mode.
To select the settings mode, press the Settings
button. The first settings screen will appear in the
display.
2. Navigate the settings mode.
While the settings mode is selected, you can
navigate through several settings screens. Press
the Display button repeatedly to select the desired
settings screen.
3. Change settings as desired.
Software Version Number—The software version
number will appear in the display.
Calibration—If the incline system needs to be
calibrated, press the Ramp increase or decrease
button. The ramp will automatically rise to the maxi-
mum incline level and then return to the starting
position. This will calibrate the incline system.
Unit of Measurement—The currently selected
unit of measurement will appear in the display. The
console can show speed and distance in standard
or metric units of measurement. To change the unit
of measurement, press the Std/Met button repeat-
edly. To view workout information in standard units,
select STD. To view workout information in metric
units, select MET.
Display Test—This screen is intended to be used
by service technicians to identify whether the
display is working correctly.
Button Test—This screen is intended to be used
by service technicians to identify whether a certain
button is working correctly.
Total Time—The word TIME will appear in the
display. The display will show the total number of
hours that the elliptical has been used.
Total Distance—The letters MI or KM will appear
in the display. The display will show the total
distance (in miles or kilometers) that the elliptical
has been pedaled.
25