Table of Contents
Advertisement
Confidential
GS / m
[Name]
Print downloaded bit image
[Format]
ASCII
Hex
Decimal
0 £ m £ 3, 48 £ m £ 51
[Range]
[Description] Prints a downloaded bit image using the mode specified by m .
m selects a mode from the table below:
m
Mode
0, 48
Normal
1, 49
Double-width
2, 50
Double-height
3, 51
Quadruple
· This command is ignored if a downloaded bit image has not been defined.
[Notes]
· In standard mode, this command is effective only when there is no data in the
print buffer.
· This command has no effect in the print modes (emphasized, double-strike,
underline, character size, or white/black reverse printing), except for upside-
down printing mode.
· If the downloaded bit-image to be printed exceeds the printable area, the
excess data is not printed.
· Refer to Figure 3.12.3 for the downloaded bit image development position in
page mode.
· If the printing area width set by GS L and GS W is less than one line in vertical,
the following processing is performed only on the line in question:
The printing area width is extended to the right up to one line in vertical. In
this case, printing does not exceed the printable area.
If the printing area width cannot be extended by one line in vertical, the left
margin is reduced to accommodate one line in vertical.
[Reference] GS * * * *
TITLE
GS
/
1D
2F
29
47
Vertical Dot Density (DPI) Horizontal Dot Density (DPI)
180
180
90
90
TM-T88 II II II II series
Specification
(STANDARD)
m
m
m
180
90
180
90
NO.
SHEET
REVISION
NEXT
D
SHEET
117
118
Advertisement
Table of Contents
