Character Specifications - Epson TM-T88IIP Manual

CONFIDENTIAL
· Printing speed may be slower depending on the data transmission speed and the
combination of control commands.
· Low transmission speed may cause intermittent printing. It is recommended to
transmit data to the printer as quickly as possible.
· High speed mode or low power consumption mode is selected by a DIP switch.
(Refer to Table 3.3.4 and 3.3.7).
8) Paper feed speed:
9) Line spacing (default):

1.2 Character Specifications

1) Number of characters:
2) Character structure:
3) Character size:
Approximately 120 mm/second
(approximately 4.72 inches/second) (continuous paper
feeding)
1/6 inch (4.23 mm)
Programmable by control command.
Alphanumeric characters:
Extended graphics:
International characters:
Multilingual character model supports printing with one of the
following characters:
À Japanese Kanji
Level 1: 3489
Level 2: 3388
Á Chinese Kanji (GB2312)
7580
(Using the GB5199 of the Chinese national standard font)
 Taiwanese Kanji (Big 5)
13494
à Thai characters (3-pass printing font)
128 characters ´ 7 pages
(133 character types)
Font A:
Font B:
Kanji:
Thai character: 12 ´ 72, 9 ´ 51
Font A is selected as the default
Refer to Table 1.2.1.
TITLE
TM-T88 II II II II series
Specification
(STANDARD)
95
128 ´ 7 pages
(including one space page)
32
JIS (JIS X0208-1990)
12 ´ 24
(including 2-dot spacing in horizontal)
9 ´ 17
(including 2-dot spacing in horizontal)
24 ´ 24
NO.
SHEET
REVISION
NEXT
C
D
SHEET
2
3