Esc S - Epson TM-T88IIP Manual

Confidential

ESC S

[Name] Select standard mode
[Format] ASCII
Hex
Decimal
[Description] Switches from page mode to standard mode.
· This command is effective only in page mode.
[Notes]
· Data buffered in page mode are cleared.
· This command sets the print position to the beginning of the line.
· The printing area set by ESC W are initialized.
· This command switches the settings for the following commands (in which the
values can be set independently in standard mode and page mode) to those for
standard mode:
Set right-side character spacing: ESC SP, FS S
Select default line spacing: ESC 2, ESC 3
· The following commands are enabled only to set in standard mode.
Set printing area in page mode: ESC W
Select print direction in page mode: ESC T
· The following commands are ignored in standard mode.
Set absolute vertical print position in page mode: GS $
Set relative vertical print position in page mode: GS \
· Standard mode is selected automatically when power is turned on, the printer is
reset, or command ESC @ is used.
[Reference] FF, ESC FF, ESC L
TITLE
ESC S
1B 53
27 83
TM-T88 II II II II series
Specification
(STANDARD)
NO.
SHEET
REVISION
NEXT
D
93
SHEET
92