Fs 2 C1 C2 D1 - Epson TM-T88IIP Manual

Confidential
FS .
[Name] Cancel Kanji character mode
[Format] ASCII
Hex
Decimal
[Description] Cancels Kanji character mode.
[Notes] For Japanese Kanji model:
· This command is effective only when the JIS code system is selected.
· When the Kanji character mode is not selected, all character codes are
processed one byte at a time as ASCII code.
· Kanji character mode is not selected when the power is turned on.
For Chinese/Taiwanese Kanji model:
· When the Kanji character mode is not selected, all character codes are
processed one byte at a time as ASCII code.
· Kanji character mode is selected when the power is turned on.
[Reference] FS &, FS C
FS 2 c1 c2 d1...dk
[Name] Define user-defined Kanji characters
[Format] ASCII
Hex
Decimal
[Range] c1 and c2 indicate character codes for the defined characters. The range of
values for c1 and c2 differ depending on the character code system used.
Model type
Japanese Kanji supporting model
(JIS code system)
Japanese Kanji supporting model
(SHIFT-JIS code system)
Chinese Kanji supporting model
Taiwanese Kanji supporting model
0 £ d £ 255
k = 72
[Description] Defines user-defined Kanji characters for the character codes specified by c1 and
c2.
· c1 and c2 indicate character codes for the defined characters. c1 specifies for
[Notes]
the first byte, and c2 for the second byte.
· d indicates the dot data. Set a corresponding bit to 1 to print a dot or to 0 to not
print a dot.
[Default] All spaces.
[Reference] FS C
TITLE
FS .
1C 2E
28 46
FS 2 c1
1C 32 c1
c1
28 50
TM-T88 II II II II series
Specification
(STANDARD)
c2 d1...dk
c2 d1...dk
c2 d1...dk
c1 c2
21H £ c2 £ 7EH
c1 = 77H
40H £ c2 £ 7EH
c1 = ECH
80H £ c2 £ 9EH
A1H £ c2 £ FEH
c1 = FEH
A1H £ c2 £ FEH
c1 = FEH
NO.
SHEET
REVISION
NEXT
D
148
SHEET
147