Gs V M Gs V M N - Epson TM-T88III Series Specification

Confidential
GS V m GS V m n
[Name] Select cut mode and cut paper
[Format] ASCII
Hex
Decimal
ASCII
Hex
Decimal
[Range] m = 1 49
m = 66, 0
[Description] Selects a mode for cutting paper and executes paper cutting. The value of m selects the mode
as follows:
m
1, 49
66
[Details for and ]
This command is effective only processed at the beginning of a line.
[Details for ]
Only the partial cut is available; there is no full cut.
[Details for ]
When n = 0, the printer feeds the paper to the cutting position and cuts it.
When n
cuts it.
The horizontal and vertical motion unit are specified by GS P .
The paper feed amount is calculated using the vertical motion unit (y
cannot be less than the minimum horizontal movement amount, and it must be in even units
of the minimum horizontal movement amount.
EPSON
GS V m
1D 56 m
29 86 m
GS V m n
1D 56 m n
29 86 m n
n 255
Print mode
Partial cut (one point left uncut)
Feeds paper (cutting position + [ n
partially (one point left uncut).
0, the printer feeds the paper to (cutting position + [ n
TITLE
TM-T88III series
Specification
(STANDARD)
(vertical motion unit)]), and cuts the paper
vertical motion unit]
. However, the value
)
SHEET NO.
REVISION
NEXT
B
128
and
)
SHEET
127