Esc C 5 N; Esc D N - Epson TM-T88IIP Manual

Confidential

ESC c 5 n

[Name] Enable/disable panel buttons
[Format] ASCII
Hex
Decimal
0 £ n £ 255
[Range]
[Description] Enables or disables the panel buttons.
· When the LSB of n is 0, the panel buttons are enabled.
· When the LSB of n is 1, the panel buttons are disabled.
· Only the lowest bit of n is valid.
[Notes]
· When the panel buttons are disabled, none of them are usable when the printer
cover is closed.
· In this printer, the panel buttons are the FEED button.
· In the macro ready mode, the FEED button are enabled regardless of the
settings of this command; however, the paper cannot be fed by using these
buttons.
[Default] n = 0

ESC d n

[Name] Print and feed n lines
[Format] ASCII
Hex
Decimal
0 £ n £ 255
[Range]
[Description] Prints the data in the print buffer and feeds n lines.
· This command sets the print starting position to the beginning of the line.
[Notes]
· This command does not affect the line spacing set by ESC 2 or ESC 3.
· The maximum paper feed amount is 1016 mm (40 inches). If the paper feed
amount ( nx line spacing) of more than 1016 mm (40 inches) is specified, the
printer feeds the paper only 1016 mm (40 inches).
[Reference] ESC 2, ESC 3
TITLE
ESC c
1B 63
27 99
ESC d
1B 64
27 100
TM-T88 II II II II series
Specification
(STANDARD)
5 n
35 n
53 n
n
n
n
NO.
SHEET
REVISION
NEXT
D
SHEET
101
102