Gs W Nl Nh - Epson TM-T88IIP Manual

Confidential
GS W n n
L H
[Name] Set printing area width
[Format] ASCII
Hex
Decimal
0 £ n £ 255
[Range]
L
0 £ n £ 255
H
[Description] Sets the printing area width to the area specified by n
· The printing area width is set to [( n
inches.
· This command is effective only processed at the beginning of the line.
[Notes]
· In page mode, the printer performs only internal flag operations.
· This command does not affect printing in page mode.
· If the [left margin + printing area width] exceeds the printable area, [printable
area width - left margin) is used.
· The horizontal and vertical motion units are specified by GS P. Changing the
horizontal and vertical motion units does not affect the current left margin.
· The horizontal motion unit ( x ) is used for calculating the printing area width.
The calculated result is truncated to the minimum value of the mechanical pitch.
TITLE
GS W
1D 57
29 87
Printable area
Left margin Printing area width
TM-T88 II II II II series
Specification
(STANDARD)
n n
L H
n n
L H
n n
L H
and n
L H
´ 256) ´ horizontal motion unit)]
+ n
L H
NO.
SHEET
REVISION
NEXT
D
.
SHEET
125
126