Epson WF-2110 Series User Manual page 119

Solving Problems
Related Information
"Temporarily Printing with Black Ink" on page 116
&
Continue Printing to Conserve Black Ink (for Windows Only)
When black ink is running low and there is enough color ink remaining, you can use a mixture of color inks to
create black. You can continue printing while preparing a replacement black ink cartridge.
This feature is only available when you select the following settings in the printer driver.
❏ Paper Type: plain papers
❏ Quality: Standard
❏ EPSON Status Monitor 3: Enabled
Note:
❏ If EPSON Status Monitor 3 is disabled, access the printer driver, click Extended Settings on the Maintenance tab, and
then select Enable EPSON Status Monitor 3.
❏ Composite black looks slightly different from pure black. In addition, the print speed is reduced.
❏ To maintain the quality of the print head, black ink is also consumed.
Options
Yes
No
Disable this feature
>
It is Time to Replace the Ink Cartridges
Description
Select to use a mixture of color inks to create black. This window is displayed the next time
you print a similar job.
Select to continue using the remaining black ink. This window is displayed the next time
you print a similar job.
Select to continue using the remaining black ink. This window is not displayed until you
replace the black ink cartridge and it runs low again.
>
Continue Printing Temporarily without Replacing In
119
...