F 6 Fine Adjustment Of Display Value - SMC Networks ISE79S L2 Series Operation Manual

■[F 6] Fine adjustment of display value
This function is to manually perform a fine adjustment of the displayed pressure value.
Pressure can be adjusted in the following range of 5%R.D.
<Operation>
Press the UP or DOWN button in function selection mode to display [F 6].
Fine adjustment of display value
Press the UP or DOWN button to change adjustment rate.
When adjustment rate is changed, the pressure value after the
adjustment will be displayed on the main screen.
Press the SET button to set.
Press the SET button.
[F 6] Fine adjustment of display value completed
-38-
Move on to fine adjustment of display value.
Return to function selection mode.
No.PS※※-OMY0007-B