Table of Contents
Advertisement
Comparing State Traces
Run the Analyzer and View the State Listing
Run the Analyzer and View the State Listing
Press the
1
Observe the listing.
2
The State Listing is now displaying the output of the ripple counter in
hexadecimal with FF (hex) at the top of the listing under the SCOUNT label.
FF is at the beginning of the listing and to the right of a field in which 0 is
displayed. The zero line number always displays the trigger point specified in
the Trigger menu. There are no negative line numbers preceding the trigger
point because the pretrigger specification was set to "While storing no state."
Trigger point (FF)
State Listing with no Pretrigger Data
Result
The state analyzer triggered on FF and began to store data, filling the
acquisition memory. The data is displayed in the State Listing.
4-6
key.
Run
Get other manuals https://www.bkmanuals.com
Advertisement
Table of Contents
