Table of Contents
Advertisement
Triggering the Oscilloscope with the Timing Analyzer
Get the Waveform on the Display
Get the Waveform on the Display
The first step when using an oscilloscope is to get the waveform on the
display. Autoscale is an algorithm that automatically optimizes the display of
one or more waveforms. The oscilloscope triggers at an arbitrary point until
you set up the trigger conditions.
Press the
1
Highlight the field in the top, left corner of the display, and press the
2
Select
key.
Highlight the
3
Continue
The arbitrary trigger
point happens to be on a
rising edge.
The glitch you will
capture with the timing
analyzer and the
oscilloscope.
Running the Oscilloscope with Autoscale
Result
The waveform is on the display with the trigger occurring on a rising edge.
8-6
key.
Config
key. Highlight
in the pop-up menu, and press the
Scope
field and press the
Autoscale
in the pop-up menu and press the
Get other manuals https://www.bkmanuals.com
Select
key. Highlight
Select
key.
Select
Advertisement
Table of Contents
