Modify Channel Assignments
In this exercise you will assign channels 8 through 11 to Pod A1, which is
attached to J1 of the training board. The analyzer will then use these
channels to capture the output of the pattern generator.
Highlight the field showing the 16 channels of Pod A1 to the far right
1
of the PATGEN label. Press the
Using the knob, move the cursor to channel 11 in the pop-up menu.
2
Then, press the ⇑ (up-arrow) key to put asterisks in channels
positions 11 through 8.
Press the
3
The asterisks (*) assign
bits 8 through 11 of Pod
A1 to the label PATGEN.
Modifying the Channel Assignments
Result
Channels 11 through 8 of Pod A1 are assigned to the label PATGEN.
Select
Done
key.
Get other manuals https://www.bkmanuals.com
Using the Pattern Generator
Modify Channel Assignments
key.
9-7