Label Character Size - HP 7090A Operator's Manual

Positionin g
Multiple Labels
Multiple Labels

Label Character Size

6-4
Labeling Functions and Operations
After printing any of the labels described previously, the
a carriage return and line f eed. automatically positioning the pen so that
invoking a subsequent label function will place the label directly beneath
the first. This feature enables you to neatly position labels without reposi-
tioning the pen after each label is drawn.
tration - the complete set of labels was created by initially positioning the
pen and then invoking each label function.
,
..
..
V
70.0. 1 0 . 0
0.
0
The dimensions used for label characters are based upon the relative posi­
tions of two movable points.
initialization. PI and P2 are located at their default positions. as shown by
the following diagrams. (Default PI is coincident with the default zero
point; default P2 is coincident with the default full-scale point.)
Scans by ArtekMedia © 2007
shown by the following illus-
as
Pi and P2. Following power-up or front-panel
HP
7090 performs
•