SMC Networks ISE70 AB Series Operation Manual page 68

High-precision digital pressure switch
Hide thumbs Also See for ISE70 AB Series:
Table of Contents

Advertisement

Product No.
Enclosure
Withstand voltage
Insulation resistance
Ambient temperature range
Operating humidity range
Standard
1: Value without digital filter (at 0 ms).
2: If the applied pressure fluctuates around the set value, the hysteresis must be set to a value more than the amount of fluctuation or
chattering will occur.
3: This setting is only available for models with the units selection function.
Only MPa, kPa or Pa is available for models without this function.
4: The response time indicates when the set value is 90% in relation to the step input.
5: Any products with tiny scratches, smears, or display colour variation or brightness which does not affect the performance are verified
as conformant products.
○Piping/weight specifications
Product No.
Port size
Pressure-sensing part
Materials in fluid
contact part
Piping port
Body
Weight
Lead wire with M12
connector
ISE70
1000 VAC for 1 minute between terminals and housing
50 MΩ or more between terminals and housing (with 500 VDC megger)
Operation: 0 to 50
Storage: -10 to 60
Operation, Storage: 35 to 85%RH (No condensation)
UL/CSA(E216656), CE/UKCA marked
02
Rc1/4
C3604 (Electroless nickel plating), HNBR
153 g
-67-
ISE71
IP67
o
C,
o
C (No condensation or freezing)
N02
NPT1/4
Silicon
152 g
139 g
No.PS※※-OMW0002-D
F02
G1/4
150 g

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ise71 ab seriesIse70Ise71

Table of Contents