Connection Of Power Supply To 10.4-Type Monochrome Lcd (Fcu6-Dut32+Kb021 - Mitsubishi Electric MELDAS C6 Maintenance Manual

5.2.2 Connection of Power Supply to 10.4-type Monochrome LCD (FCU6-DUT32+KB021)

Supply 24VDC to the CR01 connector on the rear of the LCD.
24VDC(+) 1
[FCU6-DUT32+KB021 rear view]
J1
J2
CAUTION
Separate the signal wire from the drive line/power line when wiring.
Do not apply voltages other than those indicated in this manual on the connector. Doing
so may lead to destruction or damage.
Incorrect connections may damage the devices, so connect the cables to the specified
connectors.
5. CONNECTION OF COMMUNICATION TERMINAL
5.2 Connection of Power Supply
Recommended adaptive connector
(Enclosed with FCU6-DUT32)
Connector : 2-178288-3
Contact : 1-175218-5 (tin plated) (Tyco Electronics AMP)
Y
R220 cable
FG 3
0V 2
CR03
CR06 CR05
I - 50
Get other manuals https://www.bkmanuals.com
Stabilized power supply
(Prepare separately)
FG
OPERATION BOARD Ver.A
FCU6-DUT32
MITSUBISHI ELECTRIC CORP.
CR01
CN24
CR02
24VDC(+)
0V
FG