Setup Parameters - Mitsubishi Electric MELDAS C6 Parameter Manual

4. Setup Parameters

Pressing the menu key
The system's basic parameters are normally hidden as setup parameters to prevent mistaken
operations and to simplify the display.
The setup parameters can be displayed and set by making a declaration to open the setup
parameters on this screen.
[OPEN SETUP PARAM]
1) Select the setup parameter.
Key-in Y in # ( )‚ and then press INPUT .
The basic specification parameter screen appears and the normally hidden setup parameter
menu will display.
The required menu can be selected to display and set the setup parameters.
2) Cancel the setup parameter selection.
Key-in N in # ( )‚ and then press INPUT .
The setup parameter menu will disappear.
(Note) The setup parameters are not displayed when the power is turned on.
Refer to "5. Base Specifications Parameters" and following for details on the setup parameters.
Be sure to turn off the power supply after selecting the setup parameter.
4. Setup Parameters
displays the OPEN SETUP PARAM screen.
SETUP
Open the menu setup parameter?
*YES : "Y" "INPUT"
*NO : "N" "INPUT"
# ( )
WORK PROCESS
14
Get other manuals https://www.bkmanuals.com
PARAM 3
SETUP
I/O PAR MENU