Chapter 2: Hardware Installation; Installing Central Processing Unit (Cpu) - Biostar 945G Micro 775 TE Setup Manual

945G Micro 775 TE / 945GC Micro 775

CHAPTER 2: HARDWARE INSTALLATION

2.1 I C P U (CPU)
NST ALLING ENT RAL ROCESSING NIT
Special Notice:
Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won't be damaged.
Pin-Cap
Step 1: Pull the socket locking lever out from the socket and then raise
the lever up to a 90-degree angle.
7