Table of Contents
Advertisement
2.1 Central Processing Unit (CPU)
The mainboard includes an Intel® Celeron processor, and a cooler has been installed to provide sufficient
cooling
2.2 Fan Headers
These fan headers support cooling-fans built in the computer. The fan cable and connector may be
different according to the fan manufacturer. Connect the fan cable to the connector while matching the
black wire to pin#1.
CPU_FAN: CPU Fan Header
2.3 Installing System Memory
DIMM1: DDR4L Memory Module (260pin SO-DIMM)
Note
» » If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
1. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot.
2. Insert the DIMM firmly into the slot until the retaining clips snap back in place and the DIMM is properly
seated.
Chapter 2: Hardware installation
BIELK-PAT User's Manual
Pin Assignment
1
VCC12
2
GND
3
CPU_FAN_TACH
Chapter 2: Hardware installation | 9
Advertisement
Table of Contents
