Biostar 945G Micro 775 TE Setup Manual page 87

945G Micro 775 TE / 945GC Micro 775
Special Notice:
If unfortunately, the system' s frequency that you are selected is not
functioning, there are two methods of booting-up the system.
Method 1:
Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as " ON"
status. All the CMOS data will be loaded as defaults setting.
Method 2:
P ress the <Insert> key and Power button simultaneously, after that
keep-on pressing the <Insert> key until the power-on screen showed.
This action will boot-up the system according to FSB of the processor
It's strongly recommended to set CPU Vcore and clock in default setting. If the CPU
Vcore and clock are not in default setting, it may cause CPU or M/B damage.
33