Biostar 945G Micro 775 TE Setup Manual page 21

JKBV1: Powe r Source Heade r for PS/2 Ke yboard and Mouse
Note:
In order to support this func tion "Power-on s ystem via keyboar d and mouse", "JKBV1"
jumper cap should be plac ed on Pin 2-3.
JUSBV1/JUSBV3_1: Powe r Source Heade rs for USB Ports
Pin 1-2 Close:
JUSBV1: +5V for USB ports at JRJ45USB1/JUSB2.
JUSBV3_1: +5V for USB ports at f ront panel (JUSB3/JUSB4).
Pin 2-3 Close:
JUSBV1: USB ports at JRJ45USB1/JUSB2 are powered by +5V standby
v oltage.
JUSBV3_1: USB ports at front panel (JUSB3/JUSB4) are powered by +5V
standby v oltage.
Note:
In order to support this func tion "Power-On s ys tem via U SB device," "JUSBV1/
JUSBV3_1" jumper cap should be plac ed on Pin 2-3 indi viduall y .
945G Micro 775 TE / 945GC Micro 775
1
1 3
Pin 1-2 Close
+5V for PS/2 keyboard and
mouse.
1
Pin 2-3 close
PS/2 keyboard and mouse are
powered by +5V standby
voltage.
JUSBV1
3 1
JUSBV3_1
1 3
3
3
3 1
Pin 1-2 close
3 1
Pin 2-3 close
19