Biostar 945G Micro 775 TE Setup Manual page 81

945G Micro 775 TE / 945GC Micro 775
Suspend Mode
The item allows you to select the suspend type under ACP I operating system.
The Choices: Disabled, 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min, 20 Min, 30 Min, 40
Min, 1 Hour (default).
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer .
Blank Screen
This option only writes blanks to the video buffer .
HDD Power Down
When enabled, the hard disk drive will power down and after a set time of system
inactivity. All other devices remain active.
The Choices: Disabled, 1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7 Min, 8 Min, 9 Min,
10 Min, 11 Min, 12 Min, 13 Min, 14 Min, 15 Min (default).
Soft-Off by PWR-BTN
P ressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has " hung."
The Choices: Delay 4 Sec, Instant-Off (default).
HPET Support
This item allows you to enable or disable HPET.
The Choices: Enabled (default), Disabled.
HPET Mode
This item allows you to select the HPET mode.
The Choices: 32-bit mode (default), 64-bit mode.
27