Biostar 945G Micro 775 TE Setup Manual page 78

945G Micro 775 TE / 945GC Micro 775
ACPI Function
This item displays the status of the Advanced Configuration and P ower Management
(ACP I).
The Choices: Enabled (default), Disabled.
ACPI Suspend Type
The item allows you to select the suspend type under the ACP I
operating system.
The Choices: S1 (POS) (default)
S3 (STR)
S1 & S3
Run VGABIOS if S3 Resume
Choosing Enabled will make BIOS run VGA BIOS to initialize the VGA card when
system wakes up from S3 state. The system time is shortened if you disable the
function, but system will need AGP driver to initialize the card. So, if the AGP
driver of the VGA card does not support the initialization feature, the display may
work abnormally or not function after S3.
The Choices: Auto (default), Yes, No.
Wake-Up by PCI card
When you select " Enable", a P ME signal from P CI card returns the system to
Full On state.
The Choices: Enabled, Disabled (default).
Power On by Ring
An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem) awakens the system from a soft off state.
The Choices: Enabled, Disabled (default).
USB KB/MS Wake-Up From S3
This item allows you to enable or disable USB keyboard wake up from S3.
The Choices: Disabled (default), Enabled.
Resume by Alarm
This function is for setting date and time for your computer to boot up.
During Disabled, you cannot use this function. During Enabled,
Choose the Date and Time.
Date (of Month) Alarm
You can choose which month the system will boot up.
Time (hh:mm:ss) Alarm
You can choose shat hour, minute and second the system will boot up.
Note: If you have changed the setting, you must let the system boot up
until it goes to the operating system, bef ore this f unction will work.
P ower on Suspend
Suspend to RAM
P OS+STR
24