Biostar 945G Micro 775 TE Setup Manual page 65

945G Micro 775 TE / 945GC Micro 775
Hard Disk Boot Priority
These BIOS attempt to arrange the Hard Disk boot sequence automatically.
This will depend on which Hard Disk is installed.
The Choices: P ri. Master, P ri.Slave, Sec.Master, Sec.Slave, USBHDD0, USBHDD1,
USBHDD2 and Bootable Add-in Cards.
First/Second/Third Boot Device
These BIOS attempt to load the operating system fro m the device in the sequence
selected in these items.
The Choices: Floppy, LS120, Hard Disk, CDROM, ZIP 100, USB-FDD, USB-ZIP ,
USB-CDROM, LAN, Disabled.
Boot Other Device
When enabled, BIOS will try to load the operating system from other device when it
failed to load from the three devices above.
The Choices: Enabled (default), Disabled
Swap Floppy Drive
For systems with two floppy drives, this option allows you to swap logical
drive assignments.
The Choices: Disabled (default), Enabled.
Boot Up Floppy Seek
Enabling this option will test the floppy drives to determine if they have 40 or 80
tracks. Disabling this option reduces the time it takes to boot-up.
The Choices: Disabled, Enabled (default).
11