Biostar 945G Micro 775 TE Setup Manual page 85

945G Micro 775 TE / 945GC Micro 775
Slope PWM
Increasing the value of slope PWM will raise the speed of CP U fan.
The Choices: 1 PWM Value/℃ (default), 2 P WM Value/℃, 4 P WM Value/℃, 8 P WM
Value/℃,16 P WM Value/℃.
SHUTDOWN TEMPERATURE
This item allows you to set up the CPU shutdown Temperature. This item only effective
under Windows 98 ACP I mode
The Choices: 65 C/140
O
SHOW H/W MONITOR IN POST
If you computer contain a monitoring system, it will show P C health status during POST
stage. The item offers several delay time to select you want.
The Choices: Enabled (default), Disabled.
CPU VCORE, NB/SB VOLTAGE, +3.3V, +5.0V, 12.0V, 5V(SB),VOLTAGE
BATTERY
Detect the system's voltage status automatically.
CURRENT CPU TEMP
This field displays the current temperature of CP U.
CURRENT CPU FAN SPEED
This field displays the current speed of CP U fan.
CURRENT SYS FAN SPEED
This field displays the current speed SYSTEM fan.
F, 70 C/149 F, 75 C/158 F, Disabled (default).
O O O O O
31