Adjusting The Scan Top Skew - Samsung MultiXpress K7 Series Service Manual

A3 mono copier

Table of Contents

4. Troubleshooting

4.9.3. Adjusting the Scan Top Skew

1) Remove 2 screws. And then, remove the scan glass holder cover.

2) Lift the scan glass up and release it.

Be careful not to contaminate the scan glass.

3) Adjust 'R', 'S' screws as the skew status.

For example,

a) If the top skew is like a below sample (@AS chart, 1.5mm clockwise direction skew), rotate 'S' screw one turn and

'R' screw a half turn in a clockwise direction.

The combination of 'S' screw one turn and 'R' screw a half turn must be kept.