Table of Contents
Advertisement
► Error Code
S2–4410
► Error message
Right door is open. Close it.
► Symptom
Front cover or Side cover is opened.
► Troubleshooting method
NOTE
To see the troubleshooting video for this error, click through to the link below.
(http://tsp.samsung.com/tsp_file/spds/samsungprinter/K7/Webview/EN_K7_S2-4410.html)
1) Close the side cover correctly.
2) Check if the cover open sensor connector is connected properly. Reconnect it.
3) If the sensor is defective, replace it.
Copyright© 1995-2017 SAMSUNG. All rights reserved.
4. Troubleshooting
4-154
Advertisement
Table of Contents
Troubleshooting
