Table of Contents
Advertisement
4. Troubleshooting
4.5.6.14. FDI
•
Service Functions > FDI
In this function, user and administrator can choose the type of FDI.
4.5.6.15. EIUL (End of Image Unit Life)
•
Service Functions > EIUL
The function is to set the machine hard stop when the drum life is expired.
•
Off : No machine stop @ end of drum life
•
On : Machine stop @ end of drum life
4.5.6.16. SFE (Special Feature Enablement)
•
Service Functions > SFE
Special Feature Enablement (SFE) means to provide the configurable options (On/Off) in service mode for technicians or
dealers to satisfy the requirements from B2B sites easily without changing the firmware installed in a device.
NOTE
The description for some codes like a 003, 020 can not be provided by HQ R&D policy.
SFE menu description
SFE
Description
Code
001
In case of printing in directional media (Letterhead/Preprinted/Punched), the device prints as the same output
direction regardless of simplex or duplex.
003
confidential
006
The device supports only user's own email address for scan to email.
007
[PCL6] The device prints as original 1 dot line without 2 dot line compensation.
008
[PCL5] The device ignores paper size command in PRN and prints as paper size in tray.
009
PJL readback response is changed with HPOS.
1) Add <CR><LF> to EOJ response.
2) No EOJ job but EOJ response occurs.
3) Device uses Job name instead of EOJ name.
010
Maximum value of 'Power save time' is increased as 240 min.
012
If the device is in jam status, all print jobs except secure or stored jobs are deleted automatically.
013
The device ignores the USB memory stick and detects only card reader.
014
When the authenticated user uses scan to email, user's email address is added automatically.
015
The device supports to connect to LDAPs server without any certificate.
016
The device fits image appearance in report page
018
The device blocks apk installation.
4-65
Copyright© 1995-2017 SAMSUNG. All rights reserved.
Advertisement
Table of Contents
Troubleshooting
