Waste Toner Container Sensor; Hdd (Hard Disk Drive) - Samsung MultiXpress K7 Series Service Manual

3. Disassembly and Reassembly

3.3.26. Waste Toner Container sensor

1. Remove the inner cover. (Refer to 3.3.24.)
2. Release the corresponding sensor.
• [A] : Waste Toner Level sensor
• [B] : Waste Toner Container Detect sensor

3.3.27. HDD (Hard Disk Drive)

1. Remove 2 screw-caps and 2 screws. Then remove the
front-top left cover.
3-40
2. Remove 2 screw-caps and 2 screws. Then remove the
Exit Tray.
3. Release the HDD cover after removing 4 screws.
Copyright© 1995-2017 SAMSUNG. All rights reserved.