Feed 2 Sensor - Samsung MultiXpress K7 Series Service Manual

3.3.29.2. Feed 2 sensor

1. Remove the Side Unit. (Refer to 3.3.29.)
2. Remove 4 screws.
3. Remove 3 screws. Then remove the Cover-Harness
Lower[A].
4. Remove 2 screws.
Copyright© 1995-2017 SAMSUNG. All rights reserved.
5. Remove 2 screws.
6. Remove the Guide-Take Away Lower.
7. Unplug the sensor connector. Remove 1 screw. And
then remove the Guide-Take Away Upper.
3. Disassembly and Reassembly
3-45