1000Base-Sx Ethernet Interface Card - Nortel VPN Router 1750 Installation Manual

1000BASE-SX Ethernet interface card

The 1000BASE-SX Ethernet interface card implements short-wavelength
(850 nm) laser transmissions. Use this interface card to connect to fiber Gigabit
Ethernet interfaces on other devices in your network, as well as to provide
increased throughput. The 1000BASE-SX Ethernet interface card has a single
type LC fiber connector.
The following figure shows the 1000BASE-SX Ethernet interface card.
Figure 25 1000BASE-SX Ethernet interface card
The port on the 1000BASE-SX Ethernet interface card accommodates a
multimode fiber (MMF) cable that meets MMF standards. Select fiber cable for
this interface as follows:
• 50-micron MMF cable: provides a distance range of 500–550 meters (m)
• 62.5-micron MMF cable: provides a distance range of 220–275 m
You can order a 10-foot MMF cable from Nortel:
• Order no. DM0011117 provides an LC-to-LC connector
• Order no. DM0011118 provides an LC-to-SC connector
Get other manuals https://www.bkmanuals.com
Appendix A Technical specifications 81
Nortel VPN Router Installation — VPN Router 1750
11288EA